Genbrug af kompositmaterialer fra industrien
Projekt bevilget af Styrelsen for Forskning og Innovation

Redigeret litteraturliste


Artikler og andet skriftligt materiale

Artikel: ”Gamle vindmøllevinger kan genanvendes i støjskærme”, Miljønyt (2013)

Udgivelse, flyer om GenVind: ”Center for genvinding af plastkompositter, specifikt vindmøllevinger”, Idcluster (offentliggjort på hjemmesiden), (2013)

Konference paper: “Composite recycling: Characterizing end of life of wind turbine blade material”, 19th International Conference on Composites Materials (2013)

Peer review: ”Recycling solid residues recovered from glass fibre-reinforced composites – a review applied to wind turbine blade materials”, Journal of Reinforced Plastics and Composites (2014)

Master thesis project: “Reuse of shredded composites in new polymer composite” (2014)

Student project: “Assessment of residual stresses in resin by 2D photoelasticity” (2014)

Artikel: “Genanvendelse af plast skal være en god forretning”, PLASTpanorama (2014)

Report: DTU International Energy Report 2014. Wind Energy – drivers and barriers for higher shares of wind in the global power generation mix, Kap. 13 – recycling of wind turbines (2014)

Report: “Wind turbine blade composite UD glass Fiber Composite Material Characterization” (2014)

Konference paper: “Supercritical Degradation of Unsaturated Polyester Resin Composites Using Alcohols”, ICheaP12 International Conference on Chemical and Process Engineering (2015), er peer-review

Konference paper: “Microwave induced degradation of glass fiber reinforced polyester for fiber and resin recovery”, 20th International Conference on Composite Materials (2015)

Konference paper: “Thermoset composite recycling: Properties of recovered glass fiber”, 20th International Conference on Composite Materials (2015)

Peer review: “Hydrolyse of GFR unsaturated polyester composites in subcritical water using different catalyst blends and identification of the degradation products”, Journal of Supercritical Fluids (2015)

Peer review: “Degradation of hybrid composites by means of near- and supercritical fluids and efficient recovery of glass- and carbon fibers with retained mechanical properties”, Composites Part A – Applied Science and Manufacturing (2015)

Peer review: “Review of near- and supercritical recycling of GFR and CFR thermoset polymer material to find the most cost effective, environmentally and efficient process parameters: State of the Art”, Journal of Supercritical Fluids (2015)

Paper: Characterization of the liquid products from solvolyzed epoxy- and polyester resin based composites using solid-phase microextraction and recovery of the monomer phthalic acid, Industrial and Engineering Chemistry Research (2016)

Book chapter: “End of life wind turbine blade”, open source: (2016). Endnu ikke tilgængelig

Kort artikel/skrift: ”Affald fra vindmøller bliver til nye produkter”, Idcluster (offentliggjort på hjemmesiden) (2016)

Paper: “Conversion of the matrix in glass fiber reinforced composites into a high heating value oil and other valuable feedstocks”, Journal of Fuel Processing Technology (2016)

Paper: “Recycling of shredded composites from wind turbine blades in new thermoset polymer composites”, Composites Part A (2016)

Peer-review: “Valorization of polymer composite waste by recovering the glass- and carbon fibres with retained mechanical properties simultaneously with the production of a valuable oil product”, Journal of Industrial and Engineering Chemistry Research (2016)

Peer-review: “Towards understanding the breakdown and mechanisms of glass fiber reinforced polyester composites in sub-critical water using some of the most employed and efficient additives from literature”, Journal of Polymer Degradation and Stability (2016)

Peer-review: “Thermal recycling and re-manufacturing of glass fibre thermosetting composites” (2016)



Konferencer

Workshop: Nordic workshop on plastic and textile recycling (2013)
- Præsentation: ”Recycling of plastic composites as basis for a competitive advantage – GenVind Consortium”

Konference: 19th International Conference on Composites Materials (2013)
- Præsentation: “Composite recycling: Characterizing end of life of wind turbine blade material”

Konference: Wind Turbine Blade Manufacture 2014
- Præsentation: “The influence of resin consolidation on curing cycles in the shrinkage and residual stresses in wind turbine blades”
- Præsentation: “Thick uni-directional composite testing for wind blades”

Konference: Innomatnet, 1 day workshop- Budapest (2014)
- Præsentation af GenVind og resultater under workshoppen i forskellige arbejdsgrupper

Konference: 16th European Conference on Composite Materials (2014)
- Diskussion og sammenligning af resultater med andre operatører inden for genvinding af kompositmaterialer

Konference: ICheaP12 International Conference on Chemical and Process Engineering (2015)
- Præsentation: “Supercritical Degradation of Unsaturated Polyester Resin Composites Using Alcohols”

Konference: 20th International Conference on Composite Materials (2015)
- Præsentation: “Microwave induced degradation of glass fiber reinforced polyester for fiber and resin recovery”
- Præsentation: “Thermoset composite recycling: Properties of recovered glass fiber”

Konference: Wind Turbine Blade Manufacture 2015
- Præsentation: “Effect of Resin Curing Kinetics and Resin Mechanical properties on Composite Performance”

Konference: 2nd World Congress and Expo on Recycling (2016)
- Præsentation: “Closing the life cycle of waste fiber reinforced polymer composites by converting it into valuable products”

Konference: 37th Risø International Symposium on Materials Science (2016)
- Præsentation: “Understanding performance of composite materials – mechanisms controlling properties”

Konference: 17th European Conference on Composite Materials (2016)
- Præsentation: Erstatning for aflyst indlæg, derfor ingen titel på præsentation.


© 2014 GenVind Innovation Consortium